SMART Selbttest hinterlaesst kein Log?

Helge Adler

2023-08-24 17:03:04 UTC

Post by Marc Haber
Hallo,
ich habe hier eine HDD mit 77000 Stunden Laufzeit, gerade heute einen
Selbttest laufen gelassen und die Platte behauptet, der letzte
Selbsttest war bei 12000 Stunden
Woran kann das liegen?

Wieso, da steht doch LOG:
Selbsttest vor 12123 Stunden fehlerfrei.

Sollte da üblicherweise mehr drin stehen, als dieses erfreuliche
Ergebnis?

Teils verhältnismäßig große Sprünge zwischen den Selbsttests!
Platte testet sich vll. nur selbst, wenn sie vorher ordentlich was zu
tun hatte.

Ich kenn' mich jedoch nicht aus.

Der letzte von dir angestoßene Test kürzlich ist vor dem Abschluss
abgebrochen worden:

|General SMART Values:
|Offline data collection status: (0x85) Offline data collection
|activity was aborted by an interrupting command from host.

Als Laie würde ich sagen: alles normal.

Post by Marc Haber
|smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-20-amd64] (local build)
|Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|=== START OF INFORMATION SECTION ===
|Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
|Device Model: TOSHIBA DT01ACA100
|User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|Sector Sizes: 512 bytes logical, 4096 bytes physical
|Rotation Rate: 7200 rpm
|Form Factor: 3.5 inches
|Device is: In smartctl database [for details use: -P show]
|ATA Version is: ATA8-ACS T13/1699-D revision 4
|SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|Local Time is: Thu Jun 29 17:26:37 2023 BST
|SMART support is: Available - device has SMART capability.
|SMART support is: Enabled
|
|=== START OF READ SMART DATA SECTION ===
|SMART overall-health self-assessment test result: PASSED
|
|Offline data collection status: (0x85) Offline data collection activity
| was aborted by an interrupting command from host.
| Auto Offline Data Collection: Enabled.
|Self-test execution status: ( 0) The previous self-test routine completed
| without error or no self-test has ever
| been run.
|Total time to complete Offline
|data collection: ( 7556) seconds.
|Offline data collection
|capabilities: (0x5b) SMART execute Offline immediate.
| Auto Offline data collection on/off support.
| Suspend Offline collection upon new
| command.
| Offline surface scan supported.
| Self-test supported.
| No Conveyance Self-test supported.
| Selective Self-test supported.
|SMART capabilities: (0x0003) Saves SMART data before entering
| power-saving mode.
| Supports SMART auto save timer.
|Error logging capability: (0x01) Error logging supported.
| General Purpose Logging supported.
|Short self-test routine
|recommended polling time: ( 1) minutes.
|Extended self-test routine
|recommended polling time: ( 126) minutes.
|SCT capabilities: (0x003d) SCT Status supported.
| SCT Error Recovery Control supported.
| SCT Feature Control supported.
| SCT Data Table supported.
|
|SMART Attributes Data Structure revision number: 16
|ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
| 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
| 2 Throughput_Performance 0x0005 141 141 054 Pre-fail Offline - 74
| 3 Spin_Up_Time 0x0007 121 121 024 Pre-fail Always - 189 (Average 190)
| 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 52
| 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
| 8 Seek_Time_Performance 0x0005 115 115 020 Pre-fail Offline - 34
| 9 Power_On_Hours 0x0012 089 089 000 Old_age Always - 77666
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 52
|192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 666
|193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 666
|194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 15/35)
|196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
|198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
|
|SMART Error Log Version: 1
|No Errors Logged
|
|SMART Self-test log structure revision number 1
|Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|# 1 Extended offline Completed without error 00% 12123 -
|# 2 Extended offline Completed without error 00% 12117 -
|# 3 Short offline Completed without error 00% 12076 -
|# 4 Extended offline Completed without error 00% 7374 -
|# 5 Short offline Completed without error 00% 7332 -
|# 6 Extended offline Completed without error 00% 7162 -
|# 7 Extended offline Completed without error 00% 6994 -
|# 8 Extended offline Completed without error 00% 6826 -
|# 9 Extended offline Completed without error 00% 6658 -
|#10 Extended offline Completed without error 00% 6490 -
|#11 Extended offline Completed without error 00% 6322 -
|#12 Extended offline Completed without error 00% 6154 -
|#13 Extended offline Completed without error 00% 5986 -
|#14 Extended offline Completed without error 00% 5818 -
|#15 Extended offline Completed without error 00% 5650 -
|#16 Extended offline Completed without error 00% 5482 -
|#17 Extended offline Completed without error 00% 5314 -
|#18 Extended offline Completed without error 00% 5146 -
|#19 Extended offline Completed without error 00% 4978 -
|#20 Extended offline Completed without error 00% 4809 -
|#21 Extended offline Completed without error 00% 4642 -
|
|SMART Selective self-test log data structure revision number 1
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
| 1 0 0 Not_testing
| 2 0 0 Not_testing
| 3 0 0 Not_testing
| 4 0 0 Not_testing
| 5 0 0 Not_testing
| After scanning selected spans, do NOT read-scan remainder of disk.
|If Selective self-test is pending on power-up, resume after 0 minute delay.
Grüße
Marc